Your water lines get old, they corrode or crack, and you end up with leaks behind walls or discolored water at the tap. We replace the whole system in one visit so you can stop patching and start fresh.
Licensed & insuredAvg. response 45 minutes★★★★★4.9 from 300+ local jobs
Whole-home repiping in Seaside means we pull out the old supply lines running through your house and install new ones. Older homes here, especially those built before the 1980s, often have galvanized steel or polybutylene pipes that corrode from the inside out or fail at the fittings. You start seeing low water pressure, orange or brown water when you first turn on the tap, or worse, you find a wet spot in a wall and realize a pipe has been leaking behind the drywall for months.
Our plumber inspects your system with a camera to map out what's corroded and where the weak spots are. Then we plan the route that disturbs the least amount of your home, install new copper or PEX lines with proper slope and support, and test everything at full pressure before we leave. You get a one-time fix instead of chasing leaks every few months.
The Monterey Peninsula has salt air and mineral-heavy water from our local aquifer. Both age pipes faster than you'd expect. If your house is twenty years old or older, or if you've had more than one leak in the last couple of years, whole-home repiping usually saves money over piecemeal repairs. We show up and get the job done the same day whenever possible.
When to call us
Low water pressure at multiple fixtures, not just one
Orange, brown, or cloudy water when you first turn on a tap
Visible corrosion, white or blue-green buildup on pipes or fittings
Water stains or soft spots on ceilings, walls, or floors that suggest hidden leaks
Pinhole leaks that weep from copper or galvanized pipes under sinks or in crawl spaces
Whole-home repiping jobs we handle in Seaside
Full system camera inspection to identify corroded or failing sections
New supply line installation using code-approved materials
Rerouting to avoid future problem areas and minimize wall damage
Pressure test of the entire new system before we finish
All old pipe removal and cleanup on the day of installation
Not sure which one you need? Call and describe what's going on. We'll confirm the scope and give you a free, no-obligation quote before any work starts.
Common questions
How long does a whole-home repiping take?
Most jobs take eight to twelve hours, depending on the size of your house and how the pipes run. We plan to finish the same day so you're not without water for days. We'll tell you the exact timeline before we start.
What material do you use for new pipes?
We install copper or PEX, both approved for residential water supply. Our plumber will walk you through the options during the inspection and you decide which works for your home.
Do I have to tear out walls to repipe my house?
Not necessarily. We route new lines through crawl spaces, basements, attics, or under the house when we can. Sometimes a small section of drywall comes off, but we avoid it when the layout allows. Our plumber will show you exactly where the pipes will go before work starts.
Will my water taste or smell different after repiping?
New pipes are clean inside, so yes, your water should taste and look better right away. Discolored water and off flavors usually come from corrosion inside old pipes. Once we flush the system, you'll notice the difference.